Dürkopp Adler 867 Service Instructions Manual page 73

Winder
4. Put the completely filled bobbin onto the winder.
5. Fold the winder lever (3) upwards as far as it will go to the thread.
Fig. 52: Setting the winder run and automatic stop
Setting the winder run
6. Loosen the setscrew (8).
7. Set the switch cam (9) such that it is just contacting the leaf spring (10)
8. Set the switch cam (9) such that the winder lever (3) has no axial play.
9. Tighten the setscrew (8).
Fig. 53: Setting the winder spacing
Setting the winder spacing
10. Turn the winder spindle (12) such that the tear-off knife (11) is at the
11. Loosen the setscrew in the clamp (5).
Service Instructions 867 - 03.0 - 10/2017
(5) - Clamp
(6) - Winder wheel
(7) - Setscrew
when the clamp (5) has engaged in the locking disc.
(3) - Winding lever
(5) - Clamp
(6) - Winder wheel
top right and is facing the right-hand screw hole (13).
(8) - Setscrew
(9) - Switch cam
(10) - Leaf spring
(11) - Tear-off knife
(12) - Winder spindle
(13) - Right -hand screw hole
(14) - Locking disc
71