1. Carefully attach the upper cover (2) from the side, paying attention to
2. Tighten all five screws (1).
3. Attach the lower cover (5) and tighten all three screws (4).
Locking the
Fig. 82: Locking the machine in place
machine in place
1. Lock the machine in place using the Ø3 mm locking peg (1).
The needle is in the top dead center position.
Attaching
Fig. 83: Attaching the handwheel flange
the handwheel
flange
①
②
③
1. Attach the handwheel flange (1) such that the two markings (2, 3) are
102
the dial (3) in doing so.
①
(1) - Locking peg
(1) - Handwheel flange
(2) - Cover marking
in line.
Machines with integrated motor
(3) - Marking for handwheel flange
(4) - Setscrews
Service Instructions 867 - 03.0 - 10/2017
④