Attaching
the stator
Fig. 79: Attaching the stator
1. Push the stator with ring (3) onto the shaft, taking care to pay attention
2. Fit the cover plate (2).
3. Evenly screw all three screws (1) firmly in place such that a uniform
100
CAUTION
Magnetism!
Work carefully and in a controlled manner, since the
stator can be pulled out of your hands.
①
②
(1) - Screws
(2) - Cover plate
to the ring gap for the cable.
gap exists between the cover plate (2) and shaft.
Machines with integrated motor
③
(3) - Stator with ring
Service Instructions 867 - 03.0 - 10/2017