Dürkopp Adler 867 Service Instructions Manual page 74

12. Set the winder lever (3) such that the upper arm is above the marking
 The distance between the winder lever and the outer thread on the
13. Set the clamp (5) such that it is resting against the locking disc (14).
14. Set the clamp (5) such that its distance to the winder wheel (6) is
15. Tighten the setscrew in the clamp (5).
Fig. 54: Installing the winder
Installing the winder
16. Fit the winder on the machine arm.
17. Tighten the screws (1).
72
for the XXL hook (15).
bobbin is 2 – 3 mm.
0.5 mm.
(1) - Screws (2) - Marking for XXL hook
Service Instructions 867 - 03.0 - 10/2017
Winder