3. PERIODIC CHECK
3.12 Maintenance procedure of the paper feed section
3.12.1
Replacing the feed roller/pick-up roller (tray 1)
A. Periodically replaced parts/cycle
•
Feed roller: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints)
•
Pick-up roller: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints)
B. Procedure
[2]
[1]
[3]
44
[2]
50gaf2c108na
Field Service Ver1.0 Feb.2006
1.
Remove the front cover.
(See P.128)
2.
Remove the tray 1.
(See P.143)
3.
Remove the connector [1] and the 2 screws [2],
and then remove the paper feed unit /1 [3].