Invacare HomeFillII AW Service Manual page 65

4. Secure the large pulley to the pump assembly crankshaft with a mounting screw and
washer. Torque to 25-30 in-lbs (2.82-3.74 Nm). Refer to Detail "A" in FIGURE 10.6 on
page 66.
5. Secure the two washers and motor to the pump assembly with two mounting screws
and two bushings. Torque mounting screws to 60-70 in-lbs (6.78-7.9 Nm). Refer to
Detail "B" and "C" in FIGURE 10.6
6. Install the timing belt over the large pulley and the small motor pulley. Refer to Detail
"A" in FIGURE 10.6.
7. Turn the large pulley and ensure the timing belt is tracking properly across both
pulleys.
Part No 1154316
SECTION 10—COMPRESSOR REPLACEMENT
65 ®
HomeFill II AW Compressor