The channel limiter function limits maximum servo movement. By superimposing mixing,
the linkage can be protected by setting the limiter in case servo motion becomes unexpect-
edly large.
Home screen
Channel limiter adjustment
(Preparation)
- Tap the travel button of the channel you want to set. Value in-
put buttons appear on the screen.
1
Use the [+] or [-] buttons to adjust the servo
angle.
2
When fi nished, return to the Linkage menu screen by pressing the HOME button.
74
1M23N32602_7PX_E.indb
74
Channel limiter
Menu screen
Menu-1
Tap to change page.
Channel Limiter
Linkage menu
Menu-2
For S-FHSS (analog) system, 5 to
7 channels are displayed on the
2nd page.
Adjust button
- Return to the initial value by
Limiter rate
Channel Limiter
Adjust with the [+] and [-] but-
tons.
tapping the [reset] buttons.
0~145
Initial value: 145
2017/08/02
14:17:22