FUTABA 7PX User Manual page 104

5
(Steering mixing rate adjustment)
Tap the value button of the "Steering mixing
rate" [Left] or [Right]. Value input buttons
appear on the screen, adjust each of the
left/right steering angles using the [+] or [-]
button.
6
(Ackerman adjustment)
Tap the value button of the "Ackerman
rate". Value input buttons appear on the
screen, adjust the left and right differential
amount and adjust the ackerman by [+] and
[-] button.
7
(Steering brake)
(Preparations)
When using this function, set the switch
with the "Switch select" function (page 69).
Tap the value button of the "Brake rate".
Value input buttons appear on the screen,
adjust the steering 1/2 operation position by
[+] and [-] button.
8
When finished, return to the Racing menu screen by pressing the HOME button twice.
Dial / Trim Setting
The ackerman rate adjustment can be controlled with digital trim DT1~DT6 or digital
dial DL1 etc. with the dial select function. (page 66)
1M23N32602_7PX_E.indb 105
Steering Mixing
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Steering mix rate
0~100
Initial value : 100
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Steering mix rate
-100~+0~+100
Initial value : +0
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Brake mix rate
-100~+0~+100
Initial value : +0
*Shows the ON/OFF state
2017/08/02
105
14:17:29