Dual Esc - FUTABA 7PX User Manual

This function is mixing two ESC's used with crawlers and other 4WD type vehicles and
uses the 2nd channel to control the rear motor controller and the auxiliary channel to control
the front motor controller.
Front drive only, rear drive only, and both front and rear drive (4WD) switching can be per-
formed by trim dial or by setting a switch for each mode.
Use a 50:50 trigger ratio setting. (page 62).
Home screen
Dual ESC mixing adjustment
(Preparation)
- This function has 2 methods. One method is used by switching the drive type (4WD/front/
rear) by one digital trim/dial. The other method performs switching by assigning a switch to
each mode (4WD/front/rear). Both methods are set from among DL1 and DT~1DT6 by "Trim/
Dial select" function.
1
(Function ON/OFF)
Tap "Mixing" (ON) or (OFF) to select ON / OFF.
"OFF" :Mixing function OFF
"ON" :Mixing function ON
When switching by one digital trim is set,
the set switch performs switching as shown
below.
Front drive
116
1M23N32602_7PX_E.indb 116

Dual ESC

Menu screen
Menu-1
Display the current
drive mode.
4WD Rear drive
Dual ESC
Mixing menu
Menu-2
The mixing function is assigned to auxiliary
channels used by other mixing cannot be used.
When the number of channels is insuffi cient,
cancel the other mixing.
Dual ESC
Setting
- Tap (ON) / (OFF).
2017/08/02 14:17:32