FUTABA 7PX User Manual page 87

2
("Low" and "High" return direction delay adjustment)
Tap the [Return] side of [Low] or [High]
value button. A warning is displayed
saying "Return speed will be slow.
Please be careful.". If you want to use
the return, tapped [Close]. Value input
buttons appear on the screen. Use the [+]
and [-] buttons to adjust the return speed
amount.
3
(Speed switching point adjustment)
When you want to change the "Low" and
"High" switching point, tap the [point 1]
value button. Value input buttons appear
on the screen, use the [+] or [-] buttons to
move to the point you want to set.
4
When finished, return to the Racing menu screen by pressing the HOME button twice.
Adjustment method for 2 Speed
(Preparation)
-Touch the speed mode and select [3].
1
( "Low", "Middle", or "High" turn direction delay adjustment)
Tap the [Turn] side of [Low] or [High] value
button. Value input buttons appear on the
screen. Use the [+] and [-] buttons to adjust
the turn speed amount.
88
1M23N32602_7PX_E.indb 88
Speed
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Speed range
High :1~100
Low :1~100
Initial value :
100, there is no delay.
1 100
Servo operation is delayed.
* Throttle trigger position
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Point
Point 1 :1~100
Initial value : 30
* Throttle trigger position
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Speed range
High :1~100
Middle :1~100
Low :1~100
Initial value :
100, there is no delay.
1 100
Servo operation is delayed.
* Throttle trigger position
2017/08/02 14:17:26