A.b.s - FUTABA 7PX User Manual

When the brakes are applied while cornering with a 4-Wheel Drive or
other type of vehicle, understeer may occur. The generation of under-
steer can be eliminated and corners can be smoothly cleared by using
this function.
Operation
- When the brakes are applied, the throttle servo will pulse inter-
mittently. This will have the same effect as pumping the brakes in
a full size car.
- The brake return amount, pulse cycle, and brake duty can be ad-
justed.
- By setting the brake mixing function (page 106), it can also be
set for 2nd and 3rd (auxiliary channel) brake.
Home screen
- Mode : Function ON/OFF
ABS function ON/OFF setting. When
using the ABS function, set to "ON".
- Brake return
Sets the rate at which the servo returns
versus trigger operation for brake
release. When set to 0%, the ABS
function is not performed. When set
to 50%, the servo returns 50% (1/2) of
the trigger operation amount and when
set to 100%, the servo returns to the
neutral position.
90
1M23N32602_7PX_E.indb 90

A.B.S

Menu screen Racing menu screen
A.B.S ON/OFF is indicated on
the home screen for a few sec-
onds.
It is displayed in the home screen.
When the A.B.S is ON.
Duty ratio: X and Y ratio
X: (Brake application time)
X: (Brake application time)
Trigger point
Trigger point
A.B.S
Without "A.B.S"
With "A.B.S"
A.B.S
A.B.S
Y:
(Brake return time)
Trigger operation
Trigger operation
Brake
return
Cycle speed
2017/08/02 14:17:27