FUTABA 7PX User Manual page 88

2
("Low", Middle", and "High" return direction delay adjustment)
Tap the [Return] side of [Low], [Middle]
or [High] value button. A warning is
displayed saying "Return speed will be
slow. Please be careful.". If you want to
use the return, tapped [Close]. Value input
buttons appear on the screen. Use the [+]
and [-] buttons to adjust the return speed
amount.
3
(Speed switching point adjustment)
When you want to change the "Low",
"Middle" and "High" switching point, tap the
[point 1] or [point 2] value button. Value in-
put buttons appear on the screen, use the
[+] or [-] buttons to move to the point you
want to set.
4
When finished, return to the Racing menu screen by pressing the HOME button twice.
Dial / Trim Setting
The throttle speed adjustment " Turn " and " Return " adjustment can be controlled with
digital trim DT1~DT6 or digital dial DL1 etc. with the dial select function. (page 66)
Warning
Setting the speed function in the return direction slows the deceleration of the car body, so
please be careful to set it carefully.
1M23N32602_7PX_E.indb 89
Speed
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Speed range
High :1~100
Middle :1~100
Low :1~100
Initial value :
100, there is no delay.
1 100
Servo operation is delayed.
* Throttle trigger position
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Point
Point 1 :1~100
Point 1 :2~100
Initial value : 30
* Throttle trigger position
2017/08/02
89
14:17:26