Show Qos Summary Bng - Cisco ASR 9000 Series Command Reference Manual

show qos summary BNG

show qos summary BNG
To view the QoS summary, use the show qos summary command in EXEC mode.
show qos summary {shared-policy-instance instance-name location node-id| police {interface type instance|
location node-location}| policy policy-name {interface type instance| location node-location}| queue
{interface type instance| location node-location}} {input| output} [ member type instance] [host-link type
instance] [ location node-location ][np np-location]
Syntax Description
shared-policy-instance
instance-name
police
policy policy-name
queue
interface type instance
location node-location
input
output
np np-location
member
host-link
Command Default
None
Command Modes
EXEC mode
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
506
String of up to 32 characters to identify the shared policy instance.
Show policer interface statistics.
String to identify the policy.
Show queue statistics.
Interface type and instance. For more information, use the question mark
(?) online help function .
Identifies fully qualified location specification.
Shows the specified policy map to the input interface.
Shows the specified policy map to the output interface.
(Optional) Node processor location. The node processor location is np0,
np1, np2, or np3.
The np keyword is available only for BVI interface type.
Specifies member's interface name.
The member keyword is available only for bundle-ether, PW-Ether
and PW-IW interface types.
(Optional) Specifies the host-link.
This keyword is applicable only for satellite interfaces.
QOS Commands