Cisco ASR 9000 Series Command Reference Manual page 449

PPPoE LAC-Specific Commands
RP/0/RSP0/CPU0:router# show vpdn session destination 4.5.4.5
Show output for vpdn session:
Sun Dec
Subscriber label: 0x45, interface name: GigabitEthernet0/0/0/1.pppoe14
user name: user3_vpdn@domain.com
parent interface: GigabitEthernet0/0/0/1
state: est last change: 00:03:26
time to setup session:
conditional debug flags: 0
L2TP data
local end point: 1.1.1.1 remote end point: 3.3.3.4
call serial number: 2062300015
local tunnel id: 58775 remote tunnel id: 54970
local session id: 46362 remote session id: 16 remote port: 1701
tunnel client authentication id: blah_client_auth_id
tunnel server authentication id: ios_lns
tunnel authentication: disabled
class attribute mask:
Subscriber data
NAS port id: lac_circuit_id.lac_remote_id
NAS port type: PPPoE over Ethernet
physical channel id: 0
Rx speed: 1000000000, Tx speed: 1000000000
Configuration data
table id: 0xe0000000, VRF id: 0x60000000, VPN id: 0:0
VRF name: default
dsl line info forwarding: disabled, l2tp busy timeout: 60
TOS mode: set, value: 13
Show output for tunnel destination:
Sun Dec
Destination
3.3.3.4
Related Commands
Command
vpdn, on page 424
4 22:34:19.328 PST
0:164(s:msec)
local hostname from AAA
tunnel password from AAA
4 22:36:15.296 PST
VRF-name
default
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Status Load
active 1
Description
Configures VPDN and enters the VPDN
sub-configuration mode.
show vpdn
5.2.x
435