Cisco ASR 9000 Series Command Reference Manual page 481

PPPoE Commands
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
Task ID
ppp
Examples
This is a sample output of the show pppoe limits command:
RP/0/RSP0/CPU0:router# show pppoe limits active access-interfaces loopback 45
BBA-Group TEST
--------------
Card session limit information:
Maximum session limit: 50 sessions
Warning threshold: 40 sessions
State #Sessions
----- ---------
Block 50
Access-interface session limits not configured.
MAC session limits not configured.
MAC-IWF session limits not configured.
Circuit-ID session limit information:
Maximum session limit: 50 sessions
Warning threshold: 40 sessions
Circuit-ID State #Sessions
---------- ----- ---------
circuit_id1 Block 50
circuit_id_field_which_can_be_up_to_sixty_four_chars_long Warn 45
circuit_id2 OK 32
circuit_id,/[]* OK 1
BBA-Group TEST2
---------------
Card session limits not configured.
Access-interfaces session limit information:
Maximum session limit: 50 sessions
Warning threshold: 40 sessions
Access-Interface State #Sessions
---------------- ----- ---------
GE0/1/0/0/0 Block 50
GE0/1/0/0/1 Warn 45
GE0/1/0/0/2 OK 32
GE0/1/0/0/0.12 OK 1
MAC session limits not configured.
MAC-IWF session limits not configured.
Circuit-ID session limits not configured.
This is another sample output of show pppoe limits command:
RP/0/RSP0/CPU0:router# show pppoe limits
Tue Feb
0/RSP1/CPU0
-----------
BBA-Group BNG_BBA
-----------------
Card session limits not configured.
Access-interface session limits not configured.
MAC session limits not configured.
5 21:09:40.823 UTC
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Operation
read
show pppoe limits
5.2.x
467