Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router broadband network gateway

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

IPoE Commands

This is an example of configuring the initiator dhcp command in the Interface configuration mode:

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# interface Bundle-Ether 56

RP/0/RSP0/CPU0:router(config-if)# ipsubscriber ipv6 l2-connected

RP/0/RSP0/CPU0:router(config-if-ipsub-ipv6-l2conn)# initiator dhcp

Related Commands

show ipsubscriber summary, on page 293

initiator unclassified-ip, on page 274

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release

Displays the ipsubscriber information.

Enables packet-triggered IPv4 or IPv6 routed

subscriber session in an access-interface.

initiator dhcp

Chapters

Table of Contents