Ipv4 Access-Group (Bng) - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router broadband network gateway
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

ipv4 access-group (BNG)

ipv4 access-group (BNG)
To control access to an interface, use the ipv4 access-group command in an appropriate configuration mode.
To remove the specified access group, use the no form of this command.
ipv4 access-group access-list-name {common acl-p {[acl1 ingress [hardware-count] [interface-statistics]]|
ingress}| acl1 {ingress| egress} [hardware-count] [interface-statistics]}
no ipv4 access-group access-list-name {common acl-p {[acl1 ingress [hardware-count]
[interface-statistics]]| ingress}| acl1 {ingress| egress} [hardware-count] [interface-statistics]}
Syntax Description
access-list-name
common
ingress
egress
hardware-count
interface-statistics
Command Default
The interface does not have an IPv4 access list applied to it.
Command Modes
Interface configuration (applicable only for BNG)
Dynamic template configuration (applicable only for BNG)
Command History
Release
Release 4.1.1
Release 4.2.0
Usage Guidelines
Use the ipv4 access-group command to control access to an interface. To remove the specified access group,
use the no form of the command. Use the access-list-name argument to specify a particular IPv4 access list.
Use the ingress keyword to filter on inbound packets or the egress keyword to filter on outbound packets.
Use the hardware-count argument to enable hardware counters for the access group.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
66
The name of the ipv4 access list as specified by the ipv4 access-list
command.
The name of the common ACL. Common ACL is only supported on the
ingress direction.
Filters on inbound packets.
Filters on outbound packets.
(Optional) Specifies to access a group's hardware counters.
(Optional) Specifies per-interface statistics in the hardware. Not available
for common ACL.
Modification
This command was introduced.
This command was supported in the dynamic template configuration
mode for BNG.
ACL and ABF Commands

Advertisement

Table of Contents
loading

Table of Contents