Shape Average (Bng) - Cisco ASR 9000 Series Command Reference Manual

QOS Commands

shape average (BNG)

To shape traffic to the indicated bit rate according to the algorithm specified, use the shape average command
in policy map class configuration mode. To remove traffic shaping, use the no form of this command.
shape average {percent {percentage | $shape-rate = percentage} | rate [ units ] | per-thousand value |
per-million value | $shape-rate = rate [ units ]}
no shape average
Syntax Description
percent percentage
rate
units
per-thousand value
per-million value
$
shape-rate
Command Default
units: bps
Command Modes
Policy map class configuration
Command History
Release
Release 3.7.2
Release 5.2.0
Specifies the interface bandwidth in percentage. Values can be from 1 to 100.
Average shaping rate in the specified units. Values can be from 1 to
4294967295.
(Optional) Units for the bandwidth. Values can be:
• Excess burst size—values can be from 1 to 4294967295
• bps—bits per second (default)
• gbps—gigabits per second
• kbps—kilobits per second
• mbps—megabits per second
Specifies shape rate as parts per thousand of the available bandwidth.
Specifies shape rate as parts per million of the available bandwidth.
Specifies that a QoS shaper variable is configured.
QoS shaper variable name that can be parameterized.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
$shape-rate =rate option was added to support QoS shaper
parameterization in BNG.
shape average (BNG)
5.2.x
489