Vpdn - Cisco ASR 9000 Series Command Reference Manual

vpdn

vpdn
To configure VPDN and to enter the VPDN configuration submode, use the vpdn command in Global
Configuration mode. To disable vpdn, use the no form of this command.
vpdn{caller-id| history| l2tp| logging| session-limit| softshut| template}
no vpdn
Syntax Description
caller-id
history
l2tp
logging
session-limit
softshut
template
Command Default
None
Command Modes
Global Configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the vpdn command in Global Configuration mode to enter vpdn sub-configuration mode.
Task ID
Task ID
tunnel
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
424
Specifies the options to apply on calling station id.
Enables VPDN history logging.
Specifies the l2tpv2 protocol commands.
Enables logging for VPDN.
Allows to configure maximum simultaneous VPDN sessions.
Specifies that a new session is no longer allowed.
Specifies the VPDN template configuration.
Modification
This command was introduced.
Operation
read, write
PPPoE LAC-Specific Commands