Service-Policy (Bng) - Cisco ASR 9000 Series Command Reference Manual

service-policy (BNG)

service-policy (BNG)
To associate a service-policy to the dynamic template, use the service-policy command in the dynamic template
configuration mode. To disable this feature, use the no form of this command.
service-policy {input| output| type} service-policy_name [acct-stats] [merge seq_num]
no service-policy
Syntax Description
input
output
type
service-policy_name
acct-stats
merge
seq_num
Command Default
None
Command Modes
Dynamic template configuration mode
Command History
Release
Release 4.2.0
Release 4.3.0
Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the dynamic-template type ppp command to enter the ppp dynamic template type configuration mode.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
242
Configures an ingress service-policy.
Configures an egress service-policy.
Creates the service policy for policy-based routing
(PBR).
Name of the service policy.
(Optional) Enables service accounting.
(Optional) Enables the policy to be merged.
Sequence number of the policy. Range is from 0 to
255.
Modification
This command was introduced.
Support was added for policy based routing.
acct-stats and merge keywords were added to support service
accounting and policy merge features.
Dynamic Template Commands