Slide Show - Cisco Linksys WPG12 User Manual

! Add: This function is only used when you have deleted a registered computer entry from the
"Currently Registered List". When press the "Add" button, the remote display registration
"History List" will then appear. You may add any of them to the "Currently Registered List".
To reinstate the registration, you need to make sure that computers you have added from the
history list has already successfully activated the registration.
! Delete: Click on the button, the selected computer will be removed form the "currently
registered list" .
! Delete All: Press on the button, all computers on the "currently registered list" will be removed.
! Advance Search: This function is only used when you fail to find a registered computer on the
"currently registered list" (this may happens sometime, although the possibility is very low).
You may type in the IP address of the computer directly to reinstate the registration.

Slide Show

File Upload
Step 1: Locating Wireless Presentation Gateway
First of all, please make sure about the following:
1. The hardware accessories are in place.
2. The power of Wireless Presentation Gateway is turned on, properly networked and connected
to a data projector.
You can then easily locate Wireless Presentation Gateway on the networking neighborhood of
your Microsoft Windows Explorer. Click on your targeted Wireless Presentation Gateway icon (Fig
2).