Igmp Accounting - Cisco ASR 9000 Series Command Reference Manual

Multicast Commands

igmp accounting

To enable accounting feature under igmp, use the igmp accounting command in the Global Configuration
mode. To disable this feature, use the no form of this command.
igmp accounting{ max-history| number_of_days}
no igmp accounting{ max-history| number_of_days}
Syntax Description
max-history
number_of_days
Command Default
If max-history is not specified, then the default is 0 days, which indicates that there was no history saved.
Command Modes
Global Configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
multicast
Examples
This is an example of configuring the igmp accounting command in the Global Configuration mode:
RP/0/RSP0/CPU0:router # configure
RP/0/RSP0/CPU0:router(config)# router igmp accounting max-history 67
Sets the maximum history for the accounting in days.
Specifies the number of days the history has to be retained. This value
ranged from 1 to 365.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Modification
This command was introduced.
Operation
read, write
igmp accounting
5.2.x
335