Relay Information Authenticate (Bng) - Cisco ASR 9000 Series Command Reference Manual

BNG DHCP Commands

relay information authenticate (BNG)

To specify relay agent information option to the policy plane for authentication purposes, use the relay
information authenticate command in the DHCP IPv4 proxy profile configuration mode. To disable the
relay option, use the no form of this command.
relay information authenticate {received| inserted}
no relay information authenticate {received| inserted}
Syntax Description
received
inserted
Command Default
None
Command Modes
DHCP IPv4 proxy profile configuration
Command History
Release
Release 4.3.1
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
ip-services
Examples This example shows how to specify the received relay agent information option for authentication using the
relay information authenticate command in DHCP IPv4 proxy profile configuration mode:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
RP/0/RSP0/CPU0:router(config-dhcpv4)# profile myprofile proxy
RP/0/RSP0/CPU0:router(config-dhcpv4-proxy-profile)# relay information authenticate received
Authenticate using received relay agent information option.
Authenticate using inserted relay agent information option.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
relay information authenticate (BNG)
Modification
This command was introduced.
Operations
read, write
5.2.x
183