Tracking-Disable - Cisco ASR 9000 Series Command Reference Manual

tracking-disable

tracking-disable
To disable the use of tracking objects status for automatic switchovers in BNG geo redundancy, use the
tracking-disable command in subscriber redundancy group configuration mode. To re-enable the use of
tracking objects status for automatic switchovers, use the no form of this command.
tracking-disable
no tracking-disable
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Subscriber redundancy group configuration.
Command History
Release
Release 5.2.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This is an optional command.
Task ID
Task ID
config-services
Examples This example shows how to temporarily disable the use of tracking objects status for automatic switchovers
in BNG geo redundancy:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# subscriber redundancy
RP/0/RSP0/CPU0:router(config-subscr-red)# group 1
RP/0/RSP0/CPU0:router(config-subscr-red-group)# tracking-disable
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
534
Modification
This command was introduced.
Operation
read, write
Subscriber Commands