Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference - Cisco ASR 9000 Series Command Reference Manual

show lpts punt excessive-flow-trap protocol
Task ID
Task ID
lpts
basic-services
Examples The sample output for the show lpts punt excessive-flow-trap ip command is:
RP/0/RSP0/CPU0:router# show lpts punt excessive-flow-trap ip
Interface: Bundle-Ether1.100
This table describes the significant fields shown in the display.
Table 14: show lpts punt excessive-flow-trap interface Field Descriptions
Field
Intf Handle
location
protocol
punt reason
penalty-rate
penalty-timeout
Related Commands
Command
lpts punt excessive-flow-trap, on page 252

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,

Release 5.2.x
270
Intf Handle: 0x08000320
Protocol: IPv4/v6
Penalty Rate: 10 pps
Time Remaining: 14 mins 31 secs
Excessive Punt Flow Trap Commands
Operation
read
read, write
Location: 0/6/CPU0
Punt Reason: Raw-default
Penalty Timeout: 15 mins
Description
The interface handler for the Bundle Ether interface.
The location of the interface.
Specifies if it uses the IPv4 or IPv6 protocol.
The reason to punt the excessive flow trap.
The penalty policing rate for a protocol in pps.
The penalty timeout value for a protocol in minutes.
Description
Enables the Excessive Punt Flow Trap feature.