Igmp Query-Max-Response-Time - Cisco ASR 9000 Series Command Reference Manual

igmp query-max-response-time

igmp query-max-response-time
To configure the maximum response time advertised in Internet Group Management Protocol (IGMP) queries,
use the igmp query-max-response-time command in the dynamic-template configuration mode. To disable
this feature, use the no form of this command.
igmp query-max-response-time seconds
no igmp query-max-response-time
Syntax Description
seconds
Command Default
The default query-max-response-time is 10 seconds.
Command Modes
Dynamic template configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the dynamic-template type ppp command to enter dynamic template type ppp configuration mode.
Task ID
Task ID
multicast
Examples This is the example of configuring the igmp query-max-response-time command in the dynamic-template
configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# dynamic-template
RP/0/RSP0/CPU0:router(config-dynamic-template)# type ppp foo
RP/0/RSP0/CPU0:router(config-dynamic-template-type)# igmp query-max-response-time 12
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
340
Specifies the maximum response time, in seconds, advertised in IGMP queries,
and ranges between 1 to 12.
Modification
This command was introduced.
Operation
read, write
Multicast Commands