Cisco ASR 9000 Series Command Reference Manual page 485

PPPoE Commands
show pppoe statistics
Examples
This is the sample output of the show pppoe statistics command:
RP/0/RSP0/CPU0:router# show pppoe statistics access-interfaces Loopback 156
Packets Sent Received Dropped
----------------------------------------------------------------
PADI 0 3723 18
PADO 3182 0 0
PADR 0 1732 93
PADS (success) 1601 0 0
PADS (error) 38 0 0
PADT 158 552 9
Session-stage 0 18 17
Other 0 2 2
----- ----- -----
TOTAL 3979 6063 139
RP/0/RSP0/CPU0:router# show pppoe statistics location 0/2/cpu0
Packets Sent Received Dropped
----------------------------------------------------------------
PADI 0 3723 18
PADO 3182 0 0
PADR 0 1732 93
PADS (success) 1601 0 0
PADS (error) 38 0 0
PADT 158 552 9
Session-stage 0 18 17
Other 0 2 2
----- ----- -----
TOTAL 3979 6063 139
Packet Error Count
-------------------------------------------------------
No interface handle 1
No packet payload 1
No packet mac-address 1
Invalid version-type value 3
Bad packet length 7
Unknown interface 11
PADO receive
ed 1
PADS received 1
Unknown packet type received 1
Unexpected Session-ID in packet 1
No Service-Name Tag 11
PADT for unknown session 13
PADT with wrong peer-mac 7
PADT before PADS sent 1
Session-stage packet for unknown session 13
Session-stage packet with wrong mac 19
Session-stage packet with no error 1
Tag too short 1
Bad tag-length field 1
Multiple Service-Name tags 1
Multiple Max-Payload tags 1
Invalid Max-Payload tag 1
Multiple Vendor-specific tags 1
Unexpected AC-Name tag 1
Unexpected error tags 3
Unknown tag received 1
No IANA code in vendor tag 1
Invalid IANA code in vendor tag 1
Vendor tag too short 1
Bad vendor tag length field 1
Multiple Host-Uniq tags 1
Multiple Circuit-ID tags 1
Multiple Remote-ID tags 1
Invalid DSL tag 1
Multiple of the same DSL tag 1
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
471