Cisco ASR 9000 Series Command Reference Manual page 521

Aggregation services router broadband network gateway

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

QOS Commands

Command History

Release 3.7.2

Release 4.3.0

Release 5.1.1

Usage Guidelines

To enter the dynamic template configuration mode, run dynamic-template command in the Global

Configuration mode.

This example shows the results of the command to show interfaces at location 0/1/CPU0 for a

shared-policy-instance:

RP/0/RSP0/CPU0:router# show qos summary shared-policy-instance bundlespi location 0/1/CPU0

List of interfaces/NPs retrieved

GigabitEthernet0/1/1/1 (member of Bundle-Ether1.1)

GigabitEthernet0/1/1/2 (member of Bundle-Ether1.1)

This example shows policer interface statistics of BVI interface at location 0/5/cpu0:

RP/0/RSP0/CPU0:router# show qos summary police interface bvi 1 output location 0/5/cpu0 np

1. Policer ID is displayed in HEX.

2. A '*' against the counter means the action is drop.

3. Conform displays match counter for non-policer leaf.

Policy:Class

:class-default

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release

Modification

This command was introduced.

The command was supported in dynamic template configuration mode

The np keyword was introduced.

PWHE interface type PW-Ether and PW-IW were added.

show qos summary BNG

Chapters

Table of Contents