PPPoE Commands
This example shows how to configure a pppoe session limit of 8000 and a threshold value of 7500, for each
circuit-id in a PPPoE BBA-Group:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# pppoe bba-group bba1
RP/0/RSP0/CPU0:router(config-bbagroup)# sessions circuit-id limit 8000 threshold 7500
Related Commands
Command
pppoe sessions throttle, on page 460
show pppoe limits, on page 466
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
Description
Configures a throttle value for PPPoE sessions for a PPPoE
BBA-Group in BNG.
Shows the PPPoE session limit information.
pppoe sessions limit
5.2.x
459