Dynamic-Template Type Ipsubscriber - Cisco ASR 9000 Series Command Reference Manual

dynamic-template type ipsubscriber

dynamic-template type ipsubscriber
To group a set of configuration items that can be applied to a group of subscribers based on the ipsubscriber
template type and to enter the dynamic-template configuration mode, use the dynamic-template type
ipsubscriber command. To disable this feature and exit the dynamic-template configuration mode, use the
no form of this command.
dynamic-template type ipsubscriber template-name
no dynamic-template type ipsubscriber template-name
Syntax Description
template-name
Command Default
None
Command Modes
Dynamic template configuration mode
Command History
Release
Release 4.2.0
Usage Guidelines
Use the dynamic-template command to enter dynamic template configuration mode.
Task ID
Task ID
config-services
Examples
This is an example of configuring the dynamic-template type ipsubscriber command:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# dynamic-template
RP/0/RSP0/CPU0:router(config-dynamic-template)# type ipsubscriber ipsub1
Related Commands
Command
dynamic-template, on page 232
dynamic-template type ppp, on page 236
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
234
Specifies the dynamic template name.
Modification
This command was introduced.
Operation
read, write
Description
Enables the dynamic template configuration mode.
Enables the ppp dynamic template type.
Dynamic Template Commands