Sharp MX-2630N User Manual page 732

SYSTEM SETTINGS►SETTING MODE LIST
 Default Code Setting
 Remember Billing Code Between Modes
 Disable Change of Billing Code
 Apply Default Code when Billing Code not entered
Billing Code not Entered
 Disable Billing Code for Selected Applications
• Sharp OSA
 Billing Code Display Name Setting
• Main Code Display Name
• Sub Code Display Name
 Main Code List
 Sub Code List
Card Setting (page 7-79)
l

Card Area Setting (page 7-79)
 Check System Code only in FeliCa User Area mode
 Check Facility Code in HID mode
 Importing from the setup file
 Card Scan Test
 Card Type / Card Reader Settings (page 7-79)
 Card Type / Card Reader
 Card Reader Device Registration*
*1 Appears when [LDAP] is set in "Authentication Settings".
*2 Appears when "Settings (administrator)" - [Sharp OSA Settings] → [External Accounting Application Settings] →[Set
Authentication Server (Server 1)] is enabled.
*3 This setting is configured in setting mode on the web page.
*4 This setting is configured in setting mode on the machine.
Setup Items
4
Factory default setting
usecode
Disabled
Disabled
Disabled
All Invalid
Default
Default
–
–
Disabled
Disabled
–
Disabled
200
–
7-8
U A
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes