Specifying The Original Scan Size In Paper Size - Sharp MX-2630N User Manual

FACSIMILE►BASIC TRANSMISSION METHODS
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER
SIZE
When the original size is not standard (inch size or non-standard size) or is not detected correctly, manually specify the
original size.
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
The image is sent in Mono2 only.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 4-9)
Tap the [Original] key.
2
3
Address Book
Address
Original
Scan Size
Auto A4
2-Sided
Tablet
2-Sided
Booklet
Others
4
Address
Address Book
Scan Size
Auto A4
AB Inch
A5
A5R
B5
216 x 343
Others
• If you are sending a long original, tap the [Long Size] key.
Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 1,000 mm
(39-3/8") (the maximum height is 297 mm (11-5/8")).
► TRANSMITTABLE ORIGINAL SIZES (page 4-26)
Dual Page Scan
Fax Number
Divide into 2 Pages
N-Up
Put Multiple Pages in A Page
Slow Scan Mode
Scan Thin Paper Original
Send Size
100%
Auto A4
Image Orientation
Preview
Speaker
reception memory 100%
Dual Page Scan
Fax Number
Divide into 2 Pages
N-Up
Put Multiple Pages in A Page
Slow Scan Mode
Scan Thin Paper Original
Direct Entry Custom Size
B5R B4
A4 A3
A4R 216 x 340
Preview
Long Size
Speaker
reception memory 100%
Tap the [Scan Size] key.
CA
Start
Tap the appropriate original size key.
After the settings are completed, tap
CA
Start
4-47
.