Enlarge/Reduce; Auto Ratio Select - Sharp MX-2630N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

ENLARGE/REDUCE

AUTO RATIO SELECT

This section explains how to automatically select the appropriate ratio to meet the paper size when manually changing
the paper tray to make a copy on paper that has a size different from the original.
Copy Ratio
( 25~200 )
100
Auto Image
%
By Paper Size
Original A3 B4 A4
Paper A3 B4 A4
CA Copies
Preview
For a non-standard size original, the size must be entered in order to use Auto Image.
To change the default ratio:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Copy Ratio].
Manually select the paper tray, and place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► SELECTING THE PAPER TRAY FOR COPYING (page 2-13)
► AUTOMATIC DOCUMENT FEEDER (page 1-82)
► DOCUMENT GLASS (page 1-84)
Tap the [Copy Ratio] key.
2
► COPY MODE (page 2-3)
3
Copy Ratio
Auto Image
By Paper Size
A3
Original
A3
Paper
CA
Preview
• To cancel the Auto Ratio Selection setting:
Tap [Auto Image] to deselect it.
• To return the ratio to 100%:
Tap the [100%] key.
Slightly Reduce
(3% Reduction)
B5 A4
B5 A4
B/W Colour
Start Start
( 25~200 )
100
%
Slightly Reduce
(3% Reduction)
B4 A4 B5 A4
B4 A4 B5 A4
Copies
B/W
Start
Tap the [Auto Image] key.
The reduction or enlargement ratio is automatically selected
based on the original size and the selected paper size.
The automatically selected ratio will appear in the ratio
display.
Colour
Start
2-26