Output; Sort/Group Setting - Sharp MX-2630N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

OUTPUT

SORT/GROUP SETTING

This section explains how to select the sorting method when outputting the scanned original.
Enables the sort mode when the original is placed in the automatic document feeder, and enables the group
Auto
mode when the original is placed on the document glass.
Sort Sorts the scanned original on a set basis, and
outputs them.
Group Groups the scanned original on a page basis,
and outputs them.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
Tap the [Sort/Group] key.
2
If a finisher or saddle stitch finisher is installed, tap the [Sort/ Group] key in [Others].
Select the sorting method.
3
After the settings are completed, tap
• You can select the offset output checkbox
easy removal from the output tray.
• To change the output tray, tap the [Output Tray] key, and select the output destination.
Originals
Originals
.
to have each set of output be offset from the previous set to enable
2-41
Finished
When 5 is set for the
number of copies
When 5 is set for the
number of copies
Finished