Page Layout - Sharp MX-2630N User Manual

COPIER►OTHER FUNCTIONS
CHECKING, EDITING, AND DELETING THE PAGE
LAYOUT OF COVERS AND INSERTION SHEETS

(PAGE LAYOUT)

The editing contents are different between the registered covers and insertion sheets as shown below.
• For the "Cover Sheet", you can change settings such as the paper type, copy/do not copy, 1-Sided, and 2-Sided.
• For "Insert Sheet", you can change only the page number you want to insert an insert sheet into.
1 Tap the [Others] key, and then tap the [Covers/Inserts] key.
2
Others
Covers/Inserts
Front Cover
Insertion Type A
Insertion Type B
Insertion Type C
Back
If the settings for the covers or insertion sheets are not configured, the [Page Layout] key is disabled.
3
Others
Covers/Inserts
Page Layout
-
-
Insertion Type A
<1
<1 Insertion Type B
<1 Insertion Type C
Back Cover
-
Back
Change cover or insertion sheet settings.
4
For the cover, you can change the copy mode.
You can change the page number you want to insert an insert sheet into.
After the settings are completed, tap the
key.
Original
Change Size/Direction.
Colour Mode
Cancel All
Margin Shift
Back Cover Insert Sheet
Shift Position to Have Margin
Specify Page to Insert and Press Enter
Insertion
0 Enter
Total :1
Before Back Cover
Bypass
Heavy 2 Change
Preview
Make No Copy
Paper Tray Settings Page Layout
B/W
Start
A3
Replace Order of Inserts
Colour Mode
Cancel All
Margin Shift
Shift Position to Have Margin
Make No Copy
Make No Copy
Make No Copy
Make No Copy
Preview
Make No Copy
B/W
Start
A3
key multiple times to return to the [Others] screen. Then, tap the [Back]
Tap the [Page Layout] key.
CA
Colour
Start
Check the page layout.
To exit this job after checking the page layout, tap the
key.
To edit or delete, tap the required key. When deleting, tap
the [Delete] key. When editing, tap the [Amend] key.
When setting consecutive insertion of different types of
inserts at the same page, you can tap [Replace Order of
CA
Inserts] on the action panel to change the order.
Colour
Start
2-118