Adding A Registered Image To An Original (Custom Image) - Sharp MX-2630N User Manual

COPIER►OTHER FUNCTIONS
ADDING A REGISTERED IMAGE TO AN ORIGINAL
(CUSTOM IMAGE)
This function adds an image registered in the machine to an original to make a copy.
Following are two types of custom images.
• Custom stamp (Full-colour stamp image)
• Custom watermark (Stamp image with grey-scale watermark)
The combination with other functions is described in the table below.
Combined function
Margin Shift
Erase
Dual Page Copy
Booklet
Job Build
Tandem Copy
Covers/Inserts
Separator Page
Transparency Inserts
N-Up
Book Copy
Tab Copy
Card Shot
Mirror Image
B/W Reverse
MEMO
Shifts in the same way as for an original image.
Makes a stamp copy as normal.
Makes a stamp copy by sheet.
Makes a stamp copy as normal.
Makes a stamp copy as normal.
Based on the tandem copy.
Based on the custom image setting.
Printing does not take place on separator pages.
Makes a stamp copy as normal.
Makes a stamp copy by sheet.
Makes a stamp copy as normal.
Makes a stamp copy as normal regardless of image shift setting.
Makes a stamp copy by sheet.
Makes a stamp copy as normal without mirror image reverse.
Prints an image as normal without B/W reverse. However, the following condition is set when
printed on a dark background.
Custom stamp: Printed in white
Custom watermark: Printed without being whitened
2-103
MEMO
Custom image operations