Adjusting Red/Green/Blue (Rgb Adjust) - Sharp MX-2630N User Manual

SCANNER/INTERNET FAX►OTHER FUNCTIONS

ADJUSTING RED/GREEN/BLUE (RGB Adjust)

This function heightens or lightens any one of the three colour components R (red), G (green), and B (blue).
Place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-82)
► DOCUMENT GLASS (page 1-84)
Tap the mode display to switch to the initial screen of each mode.
2
► Changing mode from each mode (page 5-10)
Specify the destination.
3
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-16)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-19)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-20)
► ENTERING AN ADDRESS MANUALLY (page 5-21)
► SPECIFYING A NETWORK FOLDER (page 5-22)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-23)
► USING A TRANSMISSION LOG TO RESEND (page 5-25)
Tap the [Others] key, and tap the [RGB Adjust] key.
4
5
Others
RGB Adjust
This setting is only applied to colour jobs.
Off
On
Back
To cancel the RGB Adjust setting:
Tap the [Off] key.
R (Red)+
G (Green)+
B (Blue)+
Colour Mode
Exposure
Specify Send Exposure
-2 -1 0 1 2
R
-2 -1 0 1 2
G
-2 -1 0 1 2
B
Preview
Touch [+] to darken and [-] to lighten
selected colour tone.
Tap of the colour you want to
adjust or slide the slider to adjust the
colouring.
After the settings are completed, tap
sequence.
CA
Start
5-101
and [Back] keys in