Setting Mode For Fax - Sharp MX-2630N User Manual

SYSTEM SETTINGS►SETTING MODE FOR FAX

SETTING MODE FOR FAX

The following lists the Setting mode for fax and factory default settings.
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
System Settings
n System Settings
Image Send Settings (page 7-180)
l
 Fax Settings
 Default Settings
• Resolution Setting
- Apply the Resolution Set when Stored
+ (No item)
• Dial Mode Setting
• Auto Wake Up Print
• Pause Time Setting
• Fax Dest. Confirmation Mode
• Speaker Settings
- Speaker
- Ringer Volume
- Line Monitor
- Fax Receive Complete Signal
- Fax Send Complete Signal
- Fax Communication Error Signal
• Remote Reception Number Setting
• Original Print on Transaction Report
• Transaction Report Print Select Setting
- Single Sending
- Broadcasting
- Receiving
Setup Items
*1
U: General user; A: System administrator/Administrator
Factory default setting
Disabled
Standard
Tone
Enabled
2 seconds
Disabled
Volume: 5
Volume: 2
Volume: No Sound
Volume: 2; Tone Pattern: 3
Transmission Complete Sound
Time Setting: 3 sec.
Volume: 2; Tone Pattern: 3
Transmission Complete Sound
Time Setting: 3 sec.
Volume: 2; Tone Pattern: 3
Transmission Complete Sound
Time Setting: Every 0.3 seconds
5
Print Out Error Report Only
Print Out Error Report Only
Print Out All Report
No Printed Report
7-178
U A
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes