Sharp MX-2630N User Manual page 606

SCANNER/INTERNET FAX►OTHER FUNCTIONS
Tap the mode display to switch to the initial screen of Internet Fax mode.
2
► Changing mode from each mode (page 5-10)
Specify the destination.
3
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-16)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-19)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-20)
► ENTERING AN ADDRESS MANUALLY (page 5-21)
► SPECIFYING A NETWORK FOLDER (page 5-22)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-23)
► USING A TRANSMISSION LOG TO RESEND (page 5-25)
Tap the [Others] key, and tap the [N-Up] key.
4
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To cancel the N-Up setting
Tap the [N-Up] key to uncheck it.
Tap the [Original] key.
5
6
Address 123
Original
Scan Size
70%
Auto A4
2-Sided
Tablet
2-Sided
Booklet
Others
Tap the [Start] key to start scanning of the original.
7
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key. Repeat the procedure until all pages have
been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
You can tap the [Preview] key to check a preview of the image before sending an image. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED (page
Tap the [Change Setting] key in the scan-end confirmation screen to change the exposure, resolution, scan size, and
send size. (However, when scanning each even-numbered page of the original, only the exposure is changed.)
N-Up
Put Multiple Pages in A Page
Slow Scan Mode
Scan Thin Paper Original
Send Size
Auto A4
Image Orientation
Preview
Start
Receive
reception memory 100%
Tap the [Image Orientation] key with
the same orientation as the original
image.
If this setting is not correct, a suitable image may not be
transmitted.
After the settings are completed, tap
CA
5-68)".
5-73
.