Ipsec Settings - Sharp MX-2630N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS
Encryption Settings
Sign E-mail
Enable "Sign E-mail" to use a signature.
Encrypt
Enable encryption.
Disable sending to the addresses which cannot be encrypted.
Prohibit transmission to addresses that cannot be encrypted.
Make of Certificate Signing Request(CSR)
Enter the information below and click the [Execute] key to create a Certificate Signing Request (CSR).
Common Name (Required)
Enter the name to be used.
Organization
Enter the name of the organization.
Organizational Unit
Enter the name of the unit within the organization.
City/Locality
Enter the city or locality.
State/Province
Enter the state or province.
Country/Region (Required)
Enter the country code.
Sender Address (Required)
Enter the address of the sender.
Key Length of Certificate
Enter the key length of the certificate.
Certificate Signing Request (CSR)
When you create a certificate signing request (CSR) with [Make of Certificate Signing Request(CSR)], the content of the
certificate signing request (CSR) appears.

IPsec Settings

IPsec can be used for data transmission/reception on a network.
When IPsec is used, data can be sent and received safely without the need to configure settings for IP packet encryption
in a Web browser or other higher-level application.
When enabling this settings, take the following notes.
• It may take some time to reflect on the machine settings, and you cannot connect to the machine during this time.
• If the Setting mode (Web version) settings are not correctly selected, connection to the machine may not be allowed,
or the settings may not allow printing, scanning, or Setting mode (Web version) display. In this case, deselect this
setting and change the System Settings (on Web pages).
Condition Settings
IPsec Settings
Specify whether or not IPsec is used for transmission.
IKEv1 Settings
Pre-Shared Key
Enter the Pre-Shared Key to be used for IKEv1.
SA Lifetime (time)
Set the SA lifetime.
SA Lifetime (size)
Set the SA lifetime size.
IKE Lifetime
Set the IKE lifetime.
7-156