Printing By Google Cloud Print - Sharp MX-2630N User Manual

PRINTER►APPENDIX

PRINTING BY GOOGLE CLOUD PRINT

Google Cloud Print is a printing service that lets you print a file in a PC, mobile device, or other client via the Cloud
server operated by Google Inc. on a printer that is connected to Cloud server.
Configure settings for connection of the machine to the Internet (proxy settings, etc.) as required for your network
environment.
The procedure for printing by Google Cloud Print is explained here.
Before using this function, you must first create a Google account.
On the MX-2630N/MX-3050N/MX-3550N/MX-4050N/MX-5050N/MX-6050N, the PS3 expansion kit is required to use Google
Cloud Print.
Mobile device
Settings on the machine
Before using this function, configure the settings below in "Settings (administrator)".
• If the machine's user authentication function is enabled, turn off "Settings (administrator)" - [User Control] - [Default
Settings] - [Disable Printing by Invalid User].
• To print in colour, you must change the permission of "Other User" to a permission that allows colour printing.
• If user authentication is enabled in the Sharp OSA application, allow printing by invalid users in the application.
• Configure the following settings in "Settings (administrator)"→[System Settings]→[Network Settings] so that they
match the settings in Google Cloud Print.
• IP address, subnet mask, default gateway
• IP address of DNS server
• Proxy server settings
• Configure the machine settings in the Google Cloud Print settings. For the Google Cloud Print settings, refer to
"Google Cloud Print Settings (page
Send a file
Cloud server
7-144)".
Send a file
3-96
Print