Specifying The Original Scan Size In Paper Size - Sharp MX-2630N User Manual

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER
SIZE
When the original size is a non-standard size or is not detected correctly, manually specify the original size.
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
The image is sent in Mono2 only.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 5-10)
2
Address Book
Address
Original
Scan Size
Auto A4
2-Sided
Tablet
2-Sided
Booklet
Others
3
Address Book Address
Scan Size
Auto A4
AB Inch
A5
A5R
B5
216 x 343
Others
If you are sending a long original, tap the [Long Size] key.
Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 1,000 mm
(39-3/8") (the maximum height is 297 mm (11-5/8")).
► TRANSMITTABLE ORIGINAL SIZES (page 5-14)
Background Adjustment
Touch to input Address
Slow Scan Mode
Scan Thin Paper Original
Blank Page Skip
Skip Blank Page in Original
Send Size
Colour Mode
100%
Sharpness
Auto A4
Adjust Outline of Image
Image Orientation
Preview
Touch to input Address Background Adjustment
Slow Scan Mode
Scan Thin Paper Original
Blank Page Skip
Skip Blank Page in Original
Colour Mode
Direct Entry Custom Size
Sharpness
Adjust Outline of Image
B5R B4
A4 A3
A4R 216 x 340
Preview
Long Size
After tapping the [Original] key, tap the
[Scan Size] key.
CA
Start
Tap the appropriate original size key.
After the settings are completed, tap
CA
Start
5-50
.