Governor Disassembly Assembly - Honda GX240RT2 Service And Repair Manual

GOVERNOR DISASSEMBLY/ASSEMBLY
Remove the crankcase cover
GOVERNOR SLIDER
ASSEMBLY:
Spread the governor weight to install
the governor sliders.
After installing the governor slider,
check to be sure it moves smoothly.
GOVERNOR WEIGHT(3)
REASSEMBLY:
After installing the governor
weight, check to be sure they
moves smoothly.
PLAIN WASHER (6 mm)
GROOVE
gx240ut2_gx270ut2_gx340ut2_gx390ut2
(page 13-4).
GOVERNOR HOLDER CLIP
ASSEMBLY:
Install firmly into the groove of
the governor shaft.
GOVERNOR WEIGHT HOLDER
GOVERNOR WEIGHT PIN (3)
CRANKCASE COVER
CRANKCASE