1/2 Reduction Unit With Clutch Disassembly/Assembly (Gx270 Only) - Honda GX240RT2 Service And Repair Manual

1/2 REDUCTION UNIT WITH CLUTCH
DISASSEMBLY/ASSEMBLY (GX270 ONLY)
Drain the oil
After installation, fill the oil
REDUCTION CASE
ASSEMBLY:
Be careful not to damage the lip of the oil
seal when installing it onto the crankshaft.
DRIVE SPROCKET
ASSEMBLY:
Attach the drive chain
to the P.T.O. shaft and
sprocket and install in
the reduction case as a
set.
CLUTCH
CENTER
P.T.O. SHAFT
BEARING (6206)
BOLT (6 x 50 mm) (9)
P.T.O. SHAFT OIL SEAL
(30 x 50 x 7 mm)
REDUCTION COVER
ASSEMBLY:
Be careful not to damage the lip of the oil
seal when installing the P.T.O. shaft into
the reduction cover.
gx240ut2_gx270ut2_gx340ut2_gx390ut2
(page 3-5).
(page 3-5).
REDUCTION OIL CAP /
OIL LEVEL GAUGE
O-RING
CLUTCH
CENTER
KEY
THRUST
WASHER
BOLT (8 x 32 mm) (4)
DRIVE CHAIN
DRAIN PLUG
WASHER
CRANKSHAFT OIL
SEAL (30 x 46 x 8 mm)
DOWEL
PIN (2)
BEARING (6205)
SPRING
WASHER
BOLT (8 x 35 mm)
REDUCTION COVER
PACKING
DRAIN BOLT
23 N·m (2.3 kgf·m, 17 lbf·ft)
CRANKCASE
CLUTCH FRICTION
DISC (2)
ASSEMBLY:
Note the installation
sequence.
CLUTCH PLATE (2)
ASSEMBLY:
Note the installation
sequence.
CLUTCH WEIGHT
HOLDER Assy.
ASSEMBLY:
Align the groove of the
clutch weight holder with
clutch center key when
installing.