Governor Disassembly; Assembly - Honda GX270H Manual

62Z7B000.book 12 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
CRANKCASE

GOVERNOR DISASSEMBLY/

ASSEMBLY

Remove the crankcase cover (page 14-4).
GOVERNOR SLIDER
ASSEMBLY:
Spread the governor weight to
install the governor slider.
After installing the governor slider,
check to be sure it moves smoothly.
GOVERNOR WEIGHT (3)
REASSEMBLY:
After installing the governor weight,
check to be sure they moves
smoothly.
GOVERNOR WEIGHT PIN (3)
PLAIN WASHER (6 mm)
GROOVE
14-12
GOVERNOR HOLDER CLIP
ASSEMBLY:
Install firmly into the groove of
the governor shaft.
GX270H:
GOVERNOR WEIGHT HOLDER
GOVERNOR SLIDER
ASSEMBLY:
Spread the governor weight to
install the governor slider.
After installing the governor slider,
check to be sure it moves smoothly.
GOVERNOR HOLDER CLIP
ASSEMBLY:
Install firmly into the groove of
the governor shaft.
GOVERNOR WEIGHT (2)
REASSEMBLY:
After installing the governor weight,
check to be sure they moves
smoothly.
GOVERNOR WEIGHT PIN (2)
GOVERNOR WEIGHT HOLDER
PLAIN WASHER (6 mm)
CRANKCASE COVER