Ignition Coil Removal/ Installation - Honda GX240RT2 Service And Repair Manual

IGNITION COIL REMOVAL/
INSTALLATION
Remove the following parts:
– Air cleaner (page 6-5)
– Fuel tank (page 6-3)
– Fan cover (page 5-2)
SPARK PLUG CAP
IGNITION COIL
INSTALLATION:
Install the Ignition coil as
shown.
HIGH-TENSION
CORD
CARBURETOR
INSULATOR
gx240ut2_gx270ut2_gx340ut2_gx390ut2
BREATHER
TUBE
HIGH-TENSION
CORD
ENGINE WIRE HARNESS
INSTALLATION:
Clamp the engine wire harness to the ribs
of the cylinder barrel as shown.
ENGINE WIRE HARNESS
RIB
Viewed from above
BOLT (6 x 28 mm) (2)
IGNITION COIL