Cooling Fan/Flywheel Removal/ Installation - Honda GX240RT2 Service And Repair Manual

COOLING FAN/FLYWHEEL REMOVAL/
INSTALLATION
REMOVAL
Remove the following parts:
– Fan cover
– Ignition coil
SPECIAL
WOODRUFF KEY
(25 x 18 mm)
FLYWHEEL
REMOVAL:
Remove the flywheel using the special and commercially
available tools shown below.
Do not hit the flywheel with a hammer.
STRAP WRENCH S-17
(Commercially available)
gx240ut2_gx270ut2_gx340ut2_gx390ut2
(page 5-2).
(page 9-3).
COOLING FAN
FLYWHEEL PULLER SET
OCT-7403 (Commercially
available)
FLYWHEEL
TOOL:
Puller collar set 07APC-ZY1A100
FLYWHEEL
(With starter)
FLYWHEEL
(Without starter)
SPECIAL NUT (16 mm)
REMOVAL:
Hold the flywheel with a commercially available strap
wrench S-17 and remove the 16 mm special nut.
Take care not to damage the cooling fan.
STRAP WRENCH
S-17
(Commercially
available)
FLYWHEEL
CHARGING SYSTEM
STARTER PULLEY
(With screen)
STARTER PULLEY
(Without screen)
SPECIAL NUT
(16 mm)