Honda GX240RT2 Service And Repair Manual page 75

COVER
FAN COVER REMOVAL/INSTALLATION
Remove the recoil starter (page
Remove the auto throttle (If equipped)
Open the harness clip and disconnect the engine stop switch connector (Without control box type).
When installing, refer to the HARNESS AND TUBE ROUTING
TUBE CLIP
BOLT
(6 x 12 mm) (6)
FAN COVER
REMOVAL:
The fan cover can be removed
with the recoil starter assembly
and tube clip installed.
gx240ut2_gx270ut2_gx340ut2_gx390ut2
10-3).
.
TAPPING SCREW
(3 x 6 mm) (2)
0.45 N·m (0.046 kgf·m,
0.33 lbf·ft)
GROMMET
(Without engine stop switch type)
(page 2-12).
HARNESS CLIP
ENGINE STOP SWITCH
COVER