Honda GX240RT2 Service And Repair Manual page 183

CRANKCASE
GOVERNOR ARM SHAFT OIL SEAL
(8 x 14 x 5 mm)
Remove the oil seal from the cylinder barrel.
Apply grease to the lip of a new oil seal (1).
Drive the oil seal in the position as shown using the
special tools.
TOOLS:
Pilot, 14 mm (2)
Driver (3)
CRANKSHAFT OIL SEAL
(35 x 52 x 8 mm)
Remove the oil seal from the cylinder barrel.
Apply grease to the lip of a new oil seal (1).
Drive the oil seal in the position as shown using the
special tools.
TOOLS:
Attachment, 52 x 55 mm (2)
Driver (3)
gx240ut2_gx270ut2_gx340ut2_gx390ut2
07746-0041200
07749-0010000
OIL SEAL LIP
07746-0010400
07749-0010000
2 mm (0.08 in)
OIL SEAL LIP
(3)
(2)
0 – 0.5 mm
(0 – 0.02 in)
(3)
(2)
(1)
(1)