1/2 Reduction Unit (Chain Type) Inspection (Gx240 Only) - Honda GX240RT2 Service And Repair Manual

1/2 REDUCTION UNIT (CHAIN TYPE)
INSPECTION (GX240 ONLY)
RADIAL BALL BEARING
Clean the bearing with solvent and dry it thoroughly.
Turn the inner race of the radial ball bearing with your
finger and check for play.
Replace the radial ball bearing if it is noisy or has
excessive play.
DRIVE SPROCKET/P.T.O. SHAFT/
DRIVE CHAIN
Check for worn or damaged teeth on the drive sprocket
(1) and P.T.O. shaft (2).
Check for a worn or damaged drive chain (3).
If necessary, replace the drive sprocket, P.T.O. shaft,
and drive chain as a set
gx240ut2_gx270ut2_gx340ut2_gx390ut2
(page 13-8).
(1)
CRANKCASE
(2)
(3)